Table of Contents
Advertisement
MOWER TROUBLESHOOTING
MOWER TROUBLESHOOTING
Symptom (if)
Discharge deflector plugged.
Streaking of grass uncut.
Uneven cut.
Blades scalping grass.
Mower belt slipping.
Excessive vibration.
Mower loads down machine.
ZD1611LF,ZD1611RLF,ZD1611RL
Cause
•
Grass too wet.
•
Grass too long.
•
Cutting too low.
•
Engine rpm too low.
•
Ground speed too fast.
•
Ground speed too fast.
•
Engine rpm too low.
•
Grass too long.
•
Blades dull or damaged.
•
Debris in mower deck.
•
Mower deck not level.
•
Ground speed too fast.
•
Blades dull.
•
Blades worn or damaged.
•
Low tire inflation.
•
Anti-scalp rollers not adjusted correctly.
•
Wheels pressure not adjusted correctly.
•
Cutting height too low.
•
Turning speed too fast.
•
Ridges in terrain.
•
Rough or uneven terrain.
•
Anti-scalp rollers not adjusted correctly.
•
Bent blade(s).
•
Mower deck plugged.
•
Debris in pulleys.
•
Worn mower belt.
•
Debris on mower deck or in pulleys.
•
Damaged mower belt.
•
Damaged pulleys.
•
Pulleys out of alignment.
•
Blades out of balance.
•
Engine rpm too low.
•
Ground speed too fast.
•
Debris wrapped around mower spindles.
•
Front of deck too low.
TROUBLESHOOTING
Remedy
•
Wait for grass to dry.
•
Raise the cutting height and cut grass twice.
•
Raise the cutting height.
•
Mow at full throttle.
•
Slow down.
•
Slow down.
•
Mow at full throttle, check and reset the engine
rpm.
•
Cut grass twice.
•
Replace blades or have blades sharpened.
•
Clean the mower deck.
•
Level the mower deck.
•
Slow down.
•
Have blades sharpened.
•
Replace the blades.
•
Add air to correct pressure.
•
Adjust the anti-scalp rollers.
•
Set both tire pressure to the correct pressure.
(See TIRES on page 68.)
•
Raise the cutting height.
•
Reduce speed on turns.
•
Change the mowing pattern.
•
Adjust wheels pressure and anti-scalp rollers.
•
Adjust wheels pressure and anti-scalp rollers.
•
Replace blade(s).
•
Unplug and clean the mower deck.
•
Clean.
•
Replace.
•
Clean the mower deck and pulleys.
•
Replace the mower belt.
•
Replace pulleys.
•
Consult your local Kubota Dealer.
•
Have blades balanced.
•
Mow at full throttle, check and reset the engine
rpm.
•
Slow down.
•
Clean the mower.
•
Adjust the mower deck.
(See MOWER DECK LEVEL on page 112.)
(Continued)
125
Advertisement
Table of Contents
Troubleshooting
