Kubota ZD1600 Series Operator's Manual page 69

ADJUSTING THE CUTTING HEIGHT
3. Use the higher settings for mowing in a rough area
or when mowing tall grass. Lower settings must be
used only for smooth lawns where short grass is
desired.
(1) Cutting height control dial
(2) Hydraulic lift control pedal
4. Adjust the anti-scalp
recommended below
condition. To minimize gouging and roller damage
or wear, the anti-scalp rollers will maintain the
ground clearance of 19 mm (0.75 in.).
IMPORTANT :
• Never allow the rollers to contact the ground
continuously as premature roller wear may
develop if set incorrectly.
• Anti-scalp rollers must maintain a minimum
clearance of 6 mm (0.25 in.) to the ground.
Bolt setting
ZD1611LF,ZD1611RLF,ZD1611RL
rollers' height as
for normal operating
RCK72P
(1) Anti-scalp roller (front, swivel type)
(2) Anti-scalp roller (rear, bolt shift type)
RCK60RP, RCK72RP
(1) Anti-scalp roller (front, swivel type)
(2) Anti-scalp roller (rear, bolt shift type)
OPERATING THE MOWER
63