Mower Mounting; Mounting The Mower Deck - Kubota ZD1600 Series Operator's Manual

MOWER MOUNTING

MOWER MOUNTING

MOUNTING THE MOWER DECK

WARNING
To avoid serious injury or death:
• Park the machine on a firm and level surface.
• Apply the parking brake.
• Chock the rear tires.
• Stop the engine and remove the key.
NOTE :
• Rear discharge
RCK72RP) are not compatible with the side
discharge mower unit (ZD1611LF).
1. Before mounting the mower deck, raise the lift links
to the full up position.
(See STARTING THE MACHINE on page 53.)
2. Adjust the cutting height control dial to the 1 in.
position.
3. Tilt up the machine with the maintenance lift
system. (See TILTING UP THE MACHINE on page
71.)
4. Place the mower deck at the left side of the
machine.
(1) Gear box
5. Slide the mower deck under the machine, and
make sure that the mower gear box is placed
properly in the center of the machine, lower the axle
from the tilt-up position to the normal position.
6. Place 50 mm (2 in.) wood blocks under each side of
the mower deck.
7. Depress the hydraulic lift control pedal (DOWN) and
pull down the lift links.
8. Attach the lift links to the mower deck with attaching
hardware.
28
mowers (RCK60RP or
(1) Lift link
(2) Clevis pin, plain washer, snap pin
9. Pull back the coupler of the universal joint.
(1) Universal joint
(2) Coupler
MOUNTING THE MOWER DECK
(A) "PULL"
ZD1611LF,ZD1611RLF,ZD1611RL