Machine Troubleshooting - Kubota ZD1600 Series Operator's Manual

TROUBLESHOOTING

MACHINE TROUBLESHOOTING

Symptom (if)
The machine operation is not
smooth.
Noise from transmission loss of
power
The machine does not move
while the engine is running.
The machine moves when the
motion control levers are in the
"NEUTRAL LOCK" position (op-
erating the engine).
Mower does not rise
Fuel decreases uneven in LH and
RH tanks.
Master system warning indicator
flashes.
All electrical equipment do not
operate.
If you have any questions, contact your local Kubota Dealer.
124
Cause
• The hydrostatic transmission oil is insufficient.
• The transmission oil filter is clogged.
• The transmission oil level is insufficient.
• The parking brake is on.
• The transmission oil level is insufficient.
• The hydrostatic lever linkage is not correctly
adjusted.
• The control linkage pivots are sticking.
• The transmission oil level is insufficient.
• Fuel valve is closed.
• Check valve is clogged.
• Bypass hose kink in the pipe between LH and
RH tanks.
• Fuel sensor is disconnected.
• Coolant temperature sensor is disconnected.
• LCD monitor malfunction.
• Slow blow fuse blown.
MACHINE TROUBLESHOOTING
Remedy
• Fill with oil.
• Replace the filter.
• Fill with oil
• Release the parking brake.
• Fill with oil.
• Consult your dealer for hydrostatic lever link-
age adjustment or pressure adjustment.
• Pull up and lubricate linkage.
• Fill with oil
• Open the fuel valve.
• Replace check valve.
• Remove the kink or replace the pipe.
• Check wire harness.
• Check wire harness.
• Replace LCD monitor.
• Replace the slow blow fuse.
ZD1611LF,ZD1611RLF,ZD1611RL