Operating Procedure For Regeneration Inhibit Mode - Kubota ZD1600 Series Operator's Manual

DPF REGENERATION PROCESS

3. Operating procedure for regeneration inhibit mode

(1) Regeneration inhibit switch
(2) Parked regeneration switch
1. Press the regeneration inhibit switch
text will appear on the LCD monitor.
PM warning level 0 to 1
IMPORTANT :
• Only use the regeneration inhibit mode when you are in an environment where regeneration is not
possible.
• Once you have moved to an environment where it is possible to regenerate, immediately disengage
the regeneration inhibit mode.
(See PM warning level and required procedures on page 37.)
ZD1611LF,ZD1611RLF,ZD1611RL
(3) Regeneration indicator
(4) Engine warning indicator
for 5 seconds to activate the regeneration inhibit mode. The following
LCD monitor display
OPERATING THE ENGINE
(5) Parked regeneration indicator
PM warning level 2 to 4
41