20
MAINTENANCE
CHECK AND MAINTENANCE
To avoid personal injury:
A Stop the engine, set the parking brake, and
remove the key.
BGear box oil
[RCK60B-23BX, RCK54-23BX, RCK48-23BX]
1. To check the oil level, remove the check plug bolt.
A Place mower on level surface.
Loosen check plug bolt. Oil should be visible
through the opening. If oil level is too low, add oil.
If oil level is too high, drain oil with the check plug
bolt.
(Use SAE 90 API GL5 gear oil)
2. To change gear oil, remove the drain plug and drain
oil.
3. Refill gear case.
A 0.36 L
A Use SAE 90 (API GL5) gear oil in all seasons.
A Change oil in gear box after first 50 hours and every
150 hours thereafter.
(1) Drain plug (Bolt)
(2) Check plug (Bolt)
(3) Oil filler plug
[RCK48R-23BX]
1. To check the oil level, loosen the check plug bolt.
A Place mower on level surface.
Check to see that the oil level is just below the
check plug port. If the level is too low, add new oil
to the prescribed level at the oil inlet.
2. To change gear oil, remove the filler plug at the gear
box, tilt the mower deck and drain the oil completely.
3. Refill gear case.
A 0.15 L
(1) Check plug (Bolt)
(2) Oil filler plug
BGreasing (Use multipurpose EP2 grease
(NLGI grade No. 2).)
1. Universal joint.
(1) Spline
(2) Grease nipple (Universal joint)