Operator Display Menus - ELECTRO FREEZE GENESIS Series Operator's Manual

ELECTRO FREEZE Soft Serve Model GEN-5400
5 Operator Controls
12 Power Switch
In the "ON" position, power is supplied
to the beater motors. Use this position
to operate the freezer. Select the "OFF"
position for disassembly and cleaning.
See Operators Display Menu for use of
this switch in recording cleaning cycles.
6

Operator Display Menus

Figure 6-1
To Enter the Operator Menu, push and hold the hidden key (11) under the F for 3 seconds
(figure 6-1).
Figure 6-2
The operator menu will show up on the screen (figure 6-2). The cursor will highlight the selected
sub-menu (i.e. Basic Setting, Actual Temps, etc.), use the Arrow Buttons to move the curser up or
down to the desired sub-menu. Once the desired menu is highlighted, in this example we will use
Basic Settings, press the select (
Offset will be shown for left and right barrel. Use the Arrow Buttons to move the cursor to highlight
the value to be changed, once highlighted press the select button and the cursor will now be
blinking. While the cursor is blinking the value may now be changed using the left or right Arrow
Buttons, once you have reached the desired setting press select (
will now stop blinking, this indicates that the value change has been stored. Follow these steps to
change any other desired settings, once complete you may use the far right Function button to exit
the operator menu or just wait and the menu will time out and return to the Home screen.
16
See Figure 5-3
4
10 2
) button to enter the sub-menu. Product Type and Temperature
(continued)
Figure 5-3
5 6 7 8 9
LEFT RIGHT
OFF OFF
L1 L2 R1 R2
1
LEFT RIGHT
OFF OFF
4
2 3
) one more time, the cursor
184297