ELECTRO FREEZE GENESIS Series Operator's Manual page 53

ELECTRO FREEZE Soft Serve Model GEN-5400
12 Routine Maintenance
184297
Winter Storage
To protect the unit during seasonal shutdown, it is important to store the
soft serve freezer properly. Please use the following procedures:
1. Disconnect all power to the freezer.
2. Disassemble and wash all parts that come into contact with the
mix with a warm, mild detergent solution. Rinse in clear water and air dry
all parts thoroughly.
3. Store the loose parts, such as the head assembly, beater
assembly and MTS parts in a safe, dry place.
4. Do not lay heavy objects on the plastic or rubber parts.
5. Cover the freezer and all loose parts to protect them from dust or
other elements that could contaminate them while in storage. Place the
freezer in a dry location.
6. On air-cooled freezers, have condenser fins cleaned by an
authorized service technician.
7. On water-cooled freezers, disconnect the water supply. Use
compressed air to blow out all remaining water in the condenser.
The water valve must be opened in order to blow out the condenser.
Failure to purge the freezer of water can result in severe damage to
the cooling system. Call your Electro Freeze Distributor for service.
8. When freezer is restarted after seasonal shutdown, remember to
replace all o-rings and seals with new parts. Rubber parts can lose their
elasticity and abilit to seal when stored.
USE ONLY ORIGINAL OR AUTHORIZED REPLACEMENT
PARTS WITH THIS FREEZER.
(See your Illustrated Replacement Parts Manual)
Should you have any questions on items that are not
included in this maintenance schedule, or problems where
service assistance is needed, please contact your local
Electro Freeze Distributor or H. C. Duke & Son, LLC.,
Electro Freeze Service Department for factory service at
(309) 755-4553 , (800) 755-4545 , FAX (309) 755-9858,
E-mail - service@electrofreeze.com.
(continued)
Important
43