ELECTRO FREEZE GENESIS Series Operator's Manual page 21

ELECTRO FREEZE Soft Serve Model GEN-5400
4 Part Names and Functions
The following descriptions apply to figure 4-2. The number preceding the part
name corresponds to the number in the figure.
1.)
2.)
3.)
4.)
184297
SHAFT - BEATER: Rotates in the
freezing cylinder, blending air and
mix as it ejects product.
BUSHING - CYLINDER: Holds the
beater in place at the front of the
cylinder. Must be lubricated.
BLADE - SCRAPER: Scrapes the
frozen product from the freezing
cylinder wall.
O-RING - SHAFT SEAL: Seals the
beater shaft to the shaft seal. Is
inserted into the seal washer. Must
be lubricated.
(continued)
5.) WASHER - SHAFT SEAL: Holds
the shaft seal o-ring. Lightly
lubricate the side opposite the
beater shaft seal.
6.) SEAL(CUP) - BEATER SHAFT:
Seals the opening between the
freezing cylinder and the beater
shaft. Do not lubricate rubber cup
portion.
11