ELECTRO FREEZE GENESIS Series Operator's Manual page 49

ELECTRO FREEZE Soft Serve Model GEN-5400
12 Routine Maintenance
AS NEEDED
swing clamp and open shoe to gain
access to the hose cavity.
hose assembly.
cabinet base below the MTS.
supplied, flush the hose cavity and
roller assembly.
to clean in between rollers. Flush
with sanitizer.
clean dry cloth.
shoe. See figure 11-1.
Figure 11-1
184297
(continued)
CAUTION
Make sure the freezer
is depressurized before
proceeding.
a. Remove cover, loosen
b. Remove mix transfer
c. Lay a towel on the
d. Using the spray bottle
e. Use a brush (supplied)
f. Wipe all surfaces with a
g. Remove and clean
(continued)
WEEKLY
1. Carefully inspect all parts
for wear, including seals, O-rings,
mix transfer tubes, and blades.
2. Replace as required.
Replace blades if worn 3/16" or more.
3. Check the shaft tang and
drive coupling for wear.
A worn coupling will have a nonparallel
shape on the drive opening.
39