ELECTRO FREEZE GENESIS Series Operator's Manual page 52

ELECTRO FREEZE Soft Serve Model GEN-5400
12 Routine Maintenance
1500 HOURS OF
OPERATION OR
6 MONTHS
1. Contact your Electro Freeze
distributor for the initial oil change of the
gear reducer.
NOTE: Under normal conditions the
INITIAL oil changed should be after
1500 hours of operation or every year,
whichever occurs first.
SEMI-ANNUALLY
1. Have the condenser fan motor
checked by your Electro Freeze
Distributor. Add oil as needed.
5000 HOURS OF
OPERATION OR
1. Contact your Electro Freeze
distributor to have the oil in the gear reducer
changed.
NOTE: Under normal conditions the oil
should be changed after 5000 hours of
operation or every year, whichever occurs
first.
42
1 YEAR
(continued)
ANNUALLY
CAUTION
To avoid electrical shock or
contact with moving parts,
make sure all switches are
in the "OFF" position and
that the main power source
is disconnected. Some
freezers have more than one
disconnect switch.
1. Call your Electro Freeze
Distributor for service to replace drive
belts and lubricate fan motor as needed.
2. Call your Electro Freeze
Distributor to clean the inside of the
freezer including base, side panels,
condenser, etc.
3. Call your Electro Freeze
Distributor to check water-cooled
condensers and flush clean to remove
scale and deposits if necessary.
184297