Cleaning And Lubricating - Mts Assembly - ELECTRO FREEZE GENESIS Series Operator's Manual

ELECTRO FREEZE Soft Serve Model GEN-5400

7.3.1 Cleaning and Lubricating - MTS Assembly

NOTE: Clean the shoe weekly or when
necessary. Do not interchange the shoe
with any other MTS shoes.
Follow these directions for each MTS
shoe:
shoe off of the pivot arm and the swing
clamp off of the clamp arm. See figure
6-11.
detergent with the brush provided and dry
thoroughly.
clean with water bottle.
Figure 7-11
26
1. Remove the O-rings and slide the
2. Carry to the sink, wash in mild
3. Brush in between rollers. Flush
Important:
Do not let shoe sit in sanitizing
solution or water. Corrosion will occur
in bore.
4. Lubricate the shoe pivot arm and
the swing clamp arm with food grade
lubricant such as Petrol-Gel.
5. Reassemble the shoe and O-ring
on pivot arm.
6. Reassemble the shoe swing
clamp and O-ring on the swing clamp
arm.
184297