4
Enter a valid IP address or domain name.
5
Select Submit.
Log in as a root User if you are so prompted. (Note: Any change of a
6
setting will only be accepted after you have successfully logged in.)
Specifying TCP Event logging
Follow this procedure to send logging messages to a pre-existing IP connection made
on the TCP port.
Step
Procedure
1
Select the System Log link.
2
Select the link for the log name you want to view or configure (the default
choices are log1 or log2).
DTC1000/1000M/4000/4500 Ethernet User Guide – Installation Guide
(Rev.1.1)
L001411
36