HID DTC4000 User Manual page 14

Telnet Command
media
net
stored net
default net
user
lpq
printer
printer sm
set sysinfo contact
location
label
from
logpath name
type
DTC1000/1000M/4000/4500 Ethernet User Guide – Installation Guide
(Rev.1.1)
Command Purpose
Display information about the
installed media in the Printer.
Display information about the
current network settings of the
Ethernet interface.
Display information about the
stored network settings of the
Ethernet interface.
Display information about the
default network settings of the
Ethernet interface.
Display information about the
defined User names and their type
(root or guest privileges).
Display information about print
jobs and their settings.
Display information about the
Printer (i.e., model number,
Firmware version and serial
number).
Display information about the
secure mark settings of the
Printer.
Set the contact string.
Set the location string.
Set the label string.
Set all strings from
default or current
settings.
Change the name of a
system log path
Change the type of a
system log path. This
starts or stops logging
on start of jobs or on
Command Format
list media
list net
list stored net
list default net
list user
list lpq
list printer
list printer sm
set sysinfo contact [<STRING>]
set sysinfo location [<STRING>]
set sysinfo label [<STRING>]
set sysinfo from default|current
set logpath <LOG_NAME>
name <NEW_NAME>
set logpath <LOG_NAME> type
[[-]job] [[-]pfault]
L001411 14