Table of Contents
Advertisement
Question
What if I lose
The DTC1000, DTC1000M printer does not have a display, so a PRN file
the password
will be generated by the Technical Support group and sent to you in order
to reset the print server "root" user password.
for my
DTC1000,
Please contact Technical Support for instructions on how to unlock the
DTC1000M
printer at
Printer or it is
not accepted?
Fill out and submit the form request. The printer serial number must be
included
Phone: 1-866-607-7339 #6
What should I
Follow this procedure:
do if the IP
1. Contact your network administrator. Ask that your current IP address
address of my
Printer is being
changed by my
network?
2. Choose an IP address that you know will not be used by any other
How can I
Follow this procedure.
verify/change
1. Open the Printer Driver properties window.
what IP address
2. Select Start -> Settings -> Printers and Faxes -> [your Printer Driver] -
my installed
Printer Driver is
expecting to
3. From the Ports tab, select Configure Port. (Note: The Host name
find my Printer?
4. Enter the correct IP address.
5. Select OK.
6. Select Apply.
7. Select Close.
DTC1000/1000M/4000/4500 Ethernet User Guide – Installation Guide
(Rev.1.1)
http://www.fargosupport.com/contact.asp
be reserved or ask that they provide a specific IP address that you
can use to configure the Ethernet interface.
OR
PC, server or network device. Use those settings to configure your
Printer with static network settings.
(Caution: Do not do this unless you know that these settings will
always be available.)
> Properties.
will indicate IP address of the connected Printer. If this does not
match your Printer's IP address, you can change it from this window.)
Answer
L001411
55
Advertisement
Table of Contents
