HID DTC4000 User Manual page 16

Telnet Command
mask
gateway
dns
domain
opts
from
ifc mode
from
save
load
DTC1000/1000M/4000/4500 Ethernet User Guide – Installation Guide
(Rev.1.1)
Command Purpose
address.
Store a new address
mask.
Store a new default
gateway.
Store a new DNS
server address.
Store a new DNS
domain suffix.
Enable or disable
automatic address
assignment using
DHCP. Static (non-
automatic) addresses
will come from the
stored or default
settings, depending on
the other settings.
Restore the network
settings from either the
default settings or the
current settings.
Specify the Ethernet
interface mode as:
automatic, full or half
duplex; 10 or 100 mHz.
Set the Ethernet mode
settings from the
default or current
settings.
Save all current
settings as the stored
settings in the
permanent memory.
Take the settings from
the stored memory and
make them the current
settings.
Command Format
store net mask <MASK>
store net gateway <ADDRESS>
store net dns <ADDRESS>
store net domain <STRING>
To enable automatic address
assignment:
store net opts dhcp
To disable automatic address
assignment:
store net opts -dhcp
store net from default|current
store ifc mode
auto|10half|10full|100half|100full
store ifc from default|current
save
load
L001411 16