Table of Contents
Advertisement
Resetting to Default Settings
The Reboot page also allows the User to reboot the Ethernet Print Server into a default
settings mode. (Note: This simply restarts the Printer in a different state with the
settings in memory temporarily ignored.)
When the Default button is selected, the stored settings in the Printer's memory are not
changed.
Step
Procedure
1
Select the Administration link.
2
Log in as a root User (using the password) if you are so prompted. (Note:
Any change of a setting will only be accepted after you have successfully
logged in.)
3
Select the Reboot link.
4
Select the Default button.
5
Wait for the Printer to reboot and display the home page.
DTC1000/1000M/4000/4500 Ethernet User Guide – Installation Guide
(Rev.1.1)
L001411
43
Advertisement
Table of Contents
