Table of Contents
Advertisement
How do I print
If your model does not have a display, then press and hold the PAUSE
the setting card
button for 4+ seconds to print a settings card. The printer must be ready
if there is no
and idle for the card to print.
display
available?
How do I
You can use the web pages if you know the current IP address.
choose a static
OR
IP address for
You can use IP Tracer which allows you to find Fargo-compatible Printers
my Ethernet
and specify their addresses.
Printer?
you reconfigure the Printer to use those static addresses and reboot the
Printer.)
How do I set
You can use the web pages if you know the current IP address.
the Printer to
work with a
static IP
address?
What do the
The LEDs indicates network activity.
LEDs by the
Ethernet
connection on
the back of the
Printer
indicate?
How do I print a
Follow this procedure.
test page from
1. Open the Printer Driver properties window.
Windows to
2. Select Start -> Settings -> Printers and Faxes -> [your Printer Driver
verify the
Ethernet
configuration of
the Printer and
3. Ensure that the printing preferences are set correctly for the Ribbon
Printer Driver?
DTC1000/1000M/4000/4500 Ethernet User Guide – Installation Guide
(Rev.1.1)
(Note: You can save static addresses. However, they are not used until
Select the Use the following IP address button on the Network web
page.
OR
Use IP Tracer, which allows you to find compatible Printers and
specify their addresses.
name (i.e., DTC1000, DTC1000M, DTC4000, DTC4500 Card Printer)]
-> Properties.
installed in your Printer. Then select the Print Test page button.
L001411
57
Advertisement
Table of Contents
