Table of Contents
Advertisement
Question
Can I print from
Yes. If you know the IP address of the Printer on any segment of your
my PC to an
network, you will be able to print to it.
Ethernet Printer
on a different
network
segment?
Can I use IP
No. The IP Tracer can only locate Printers located in the same network
Tracer to locate
segment (as the PC running IP Tracer).
Printers on a
different
network
segment?
How do I
This is done in the same manner as a USB connected Printer, or from the
upgrade the
Upgrade web page of the Print Server. The PC doing the upgrade must
Printer
have a Driver installed for the Printer to be upgraded.
Firmware in my
Follow this procedure.
Ethernet-
1. Run the Diagnostic Utility from the start menu: Go to the Start ->
enabled
Printer?
2. Select the Printer to upgrade from the drop-down box.
3. Select Upgrade Firmware from the Application icon.
4. If you need to download the update file from the Internet, select the
5. Choose the update file with the Browse button.
6. Select the OK button.
What is the
The default passwords are blank (i.e., an empty string).
default User
name and
password for
the Printer?
What if I lose
Procedure for units with a display:
the password
1.) Press the button for information on the display.
for my Printer or
2.) Press the down arrow button until "Network" is highlighted.
it is not
accepted?
3.) Press the button for Enter.
4.) Press the down arrow button until "Rst Password" is highlighted.
5.) Press the button for Enter.
6.) Press the button for OK (check mark).
DTC1000/1000M/4000/4500 Ethernet User Guide – Installation Guide
(Rev.1.1)
Programs ->Fargo -> Fargo Workbench Printer Utility->Fargo
Workbench.
Technical Support Website link.
The default Users are as follows: root as the administrative User and
guest as a non-administrative User.
The Printer supports four (4) Users.
Answer
L001411
54
Advertisement
Table of Contents
