Table of Contents
Advertisement
leave it blank if you want to remove the old password.
6
Select the Submit button.
Log in as a root User (using the password) if you are so prompted. (Note:
7
Any change of a setting will only be accepted after you have successfully
logged in.)
Upgrading the Print Server
This procedure provides a means to upgrade the Firmware in Printer.
An alternative method for firmware upgrade. Upgrading the Printer Firmware using the
Workbench Printer Utility
Step
Procedure
1
Select the Administration link.
Log in as a root User (using the password) if you are so prompted. (Note:
2
Any change of setting will only be accepted after you have successfully logged
in.)
3
Select the Upgrade link.
4
Select the Browse button.
5
Navigate to and select the appropriate file to upload.
DTC1000/1000M/4000/4500 Ethernet User Guide – Installation Guide
(Rev.1.1)
L001411
40
Advertisement
Table of Contents
