HID DTC4000 User Manual page 53

Question
How do I This is done in the same manner as a USB connected Printer, or from the
upgrade the Upgrade web page of the Print Server. The PC doing the upgrade must
Printer have a Driver installed for the Printer to be upgraded.
Firmware in my
Follow this procedure.
Ethernet-
1. Run the Diagnostic Utility from the start menu: Go to the Start ->
enabled
Printer?
2. Select the Printer to upgrade from the drop-down box.
3. Select Upgrade Firmware from the Application icon.
4. If you need to download the update file from the Internet, select the
5. Choose the update file with the Browse button.
6. Select the OK button.
Can I print from Yes. Follow this procedure:
my PC to
1. You can install multiple Printer instances by using the Add Printer
multiple
Ethernet
2. Run the Add Printer Wizard by choosing Add Printer from the Printers
Printers?
3. Select Add a Local Printer
4. Create a new port and select DTC1000, DTC1000M, DTC4000, or
5. Enter the IP address of the Printer. Click Next.
6. Enter a name for the port. Click Next.
7. Select for the Manufacturer and select the DTC1000, DTC1000M,
8. Enter a name for the Printer instance. Click Next.
9. Keep existing driver.
10. Continue with the wizard instructions.
11. Click Finish to close the wizard.
Can multiple Yes. Each PC must have the Printer Driver software for the specific
PC's print to my
Ethernet-enabled Printer and connect to the intended Printer, using the
Ethernet correct IP address.
Printer?
DTC1000/1000M/4000/4500 Ethernet User Guide – Installation Guide
(Rev.1.1)
Programs ->Fargo -> Fargo Workbench Printer Utility->Fargo
Workbench.
Technical Support Website link.
wizard.
Control Panel.
DTC4500 TCP/IP Card Printer Port. Click Next.
DTC4000 or the DTC4500 for the Printer. Click Next.
Answer
L001411 53