Table 20: Components For Da16200 Fccsp, 1.8 V Flash, Low Power Mode; Table 21: Io Power Domain - Renesas DA16200 H/W User Manual

UM-WI-006
DA16200 H/W Design Guide

Table 20: Components for DA16200 fcCSP, 1.8 V Flash, Low Power Mode

Quantity Part Reference
1 R1
2 C2, C3
1 C6
4 C1, C4, C5, C9
1 C7
1 R2
1 L1
1 C8
2 C10, C11
1 R3
1 C12
1 R4, R5
1 C13
1 C15
1 L3
1 C17
2 C18, C19
1 L2
Note 1 Use any 5 % tolerance.

Table 21: IO Power Domain

VDD_DIO1
VDD_DIO2
VDD_FDIO (Note
Note 1 VDD_FDIO is internally connected to FDIO_LDO_OUT.
User Manual
CFR0012
Value Description
30 kΩ (1 %)
1.2 pF These values may be changed by crystal component
characteristics and board condition.
Part: FCX-07L
470 nF
1 µF
2.2 µF
10 kΩ
4.7 µH LQM21PN4R7MGH (Murata)
10 µF
15 pF These values may be changed by crystal component
characteristics and board condition.
Part: TFX-03
Remove when external MCU control 'RTC_PWR_KEY'.
This value should be chosen by customer application to
470 kΩ
achieve the enough delay time depending on the power-on
time of VBAT.
For detailed information, see
Remove when external MCU control 'RTC_PWR_KEY'.
This value should be chosen by customer application to
1 uF achieve the enough delay time depending on the power-on
time of VBAT. Not exceed 1 uF.
For detailed information, see
4.7 kΩ
4.7 µF
DNI Low power mode
2.2 nH Low power mode
0.5 pF Optional
1 pF Optional
1.8 nH Optional
IO Power Domain
GPIOC[8:6], TMS, TCLK, UART_TXD, UART_RXD
1)
Revision 1.5
37 of 44
[1] (section 6.1).
[1] (section 6.1).
GPIOA[11:0]
F_IO[3:0], F_CSN, F_CLK
© 2022 Renesas Electronics
NDA Confidential
11-Apr-2022