Figure 14: Part Name Description; Table 9: New Flash Verification Process - Renesas DA16200 H/W User Manual

UM-WI-006
DA16200 H/W Design Guide
If customers want to use other types of serial flash, then the extraction (from serial flash
specification) and optimization of the SFDP parameters is needed. And a new serial flash should be
used, the schedule shown in
in their project planning.

Table 9: New Flash Verification Process

Verification process
'D': date of receiving the board-adopted new serial flash
a. Extract SFDP parameter
- D + 10
b. Apply SFDP table to img & function test
- D + 15
- Function test in normal condition
c. Reliability test
- Function test in severe condition
- D + 21
d. Final SDK release
- D + 30
User Manual
CFR0012

Figure 14: Part Name Description

Table 9 is required, which the customer should take into consideration
Revision 1.5
22 of 44
NDA Confidential
11-Apr-2022
© 2022 Renesas Electronics