Application example for cloud connectivity (51 pages)
Summary of Contents for Renesas DP-64S
Page 1
On April 1 , 2010, NEC Electronics Corporation merged with Renesas Technology Corporation, and Renesas Electronics Corporation took over all the business of both companies. Therefore, although the old company name remains in this document, it is a valid Renesas Electronics document. We appreciate your understanding.
Page 2
Renesas Electronics. Renesas Electronics shall not be in any way liable for any damages or losses incurred by you or third parties arising from the use of any Renesas Electronics product for an application categorized as “Specific”...
Page 3
H8/3257 Series DP-64S User System Interface Cable (HS3257ECS61H) for E6000 Emulator User’s Manual Rev.3.0 2003.04...
Page 4
1. Renesas neither warrants nor grants licenses of any rights of Renesas’s or any third party’s patent, copyright, trademark, or other intellectual property rights for information contained in this document. Renesas bears no responsibility for problems that may arise with third party’s rights, including intellectual property rights, in connection with use of the information contained in this document.
Page 5
The HS3257ECS61H is a user system interface cable that connects an H8/300 series E6000 emulator (HS3008EPI60H; hereinafter referred to as the emulator) to the IC socket for a DP-64S package for the H8/3257 series MCU on the user system.
Section 1 Configuration...1 Section 2 Connection Procedures ...3 Connecting User System Interface Cable to Emulator Station ... 3 Connecting User System Interface Cable to User System ... 5 2.2.1 Installing IC Socket ... 5 2.2.2 Inserting Cable Head ... 5 2.2.3 Fastening Cable Body...
Section 1 Configuration Use an IC83-64075-GS4 socket (manufactured by YAMAICHI ELECTRONICS Co., Ltd.) for the DP-64S package IC socket on the user system. Figure 1 shows the configuration of the HS3257ECS61H user system interface cable for the DP-64S package. Figure 1 HS3257ECS61H User System Interface Cable...
Page 8
Table 1 lists the HS3257ECS61H components. Please make sure you have all of these components when unpacking. Table 1 HS3257ECS61H Components No. Component Cable body Cable head IC socket Documentation Quantity Remarks Flat cable For protection of the DP-64S package User’s manual for HS3257ECS61H (this manual)
Section 2 Connection Procedures Connecting User System Interface Cable to Emulator Station Observe the precautions listed below. Failure to do so will result in a FIRE HAZARD and will damage the user system and the emulator product or will result in PERSONAL INJURY.
Page 10
Emulator station Figure 2 Connecting User System Interface Cable to Emulator Station...
Check the location of pin 1 before inserting. Align pin 1 on the IC socket for a DP-64S package on the user system with pin 1 on the user system interface cable head, and insert the user system interface cable head into the IC socket on the user system, as shown in figure 3.
Page 12
Pin 1 Cable head IC socket (IC83-64075-GS4 manufactured by YAMAICHI ELECTRONICS Co., Ltd.) User system Figure 3 Connecting User System Interface Cable to User System...
Dimensions for User System Interface Cable Head The dimensions for the user system interface cable head are shown in figure 4. Figure 5 Dimensions for User System Interface Cable Head...
Resulting Dimensions after Connecting User System Interface Cable The resulting dimensions, after connecting the user system interface cable head to the user system, are shown in figure 5. IC83-64075-GS4 IC83-64075-GS4 Figure 6 Resulting Dimensions after Connecting User System Interface Cable...
Section 3 Verifying Operation 1. When using the H8/300 series E6000 emulator (HS3008EPI60H), turn on the emulator according to the procedures described in the H8/300 Series E6000 Emulator User's Manual (HS3008EPI60HE). 2. Verify the user system interface cable connections by accessing the external memory and ports to check the bus states of the pins.
1. Make sure that pin 1 on the user system IC socket is correctly aligned with pin 1 on the cable head before inserting the cable head into the user system IC socket. 2. This user system interface cable is specifically designed for the HS3008EPI60H emulator. Do not use this cable with any other emulator station.