Install The Left And Right Cylinder Hoses - Raven AutoBoom Installation Manual

Tank Hose Installed
FIGURE 5.
Locate and disconnect the machine's tank hose from the machine's hydraulic valve.
7.
Remove the hose barb fitting from the fitting installed in the tank port.
8.
Install a 1/2" NPT M/F/F tee adapter fitting (P/N 333-0012-181) in the open tank port of the machine's
9.
hydraulic valve.
Install the machine's barb fitting removed in step 8 on the opposite end of the installed tee fitting.
10.
Connect the machine's tank hose to the installed barb fitting.
11.
Install a 1/2" NPT (M) to 3/4" JIC (M) straight adapter fitting (P/N 333-0012-157) on the 90° end of the
12.
installed tee fitting.
Install the straight end of the supplied hydraulic hose (P/N 214-1000-371) on the installed adapter fitting.
13.
Connect the 90° end of the installed hydraulic hose to the fitting installed in Port T of the AutoBoom valve.
14.

Install the Left and Right Cylinder Hoses

Cylinder Hoses Installed
FIGURE 6.
Locate and disconnect the machine's left cylinder raise hose from the machine's hydraulic valve.
1.
Install a 9/16" JIC M/M/F swivel run tee adapter fitting (P/N 333-0012-043) in the open left cylinder port.
2.
Connect the machine's left cylinder hose to the opposite end of the installed tee fitting.
3.
Manual No. 016-0230-106
Tank
Hose
Port T
Left
Right
Hydraulic System Installation
13