Changing The Oil Of The Multiplier Gear - Hakki Pilke 55 PRO Manual

5.2. Changing the oil of the multiplier gear

1. Remove drain plug C (Figure
32) and drain the oil into a
suitable container.
Note! The multiplier gear's
oil volume is 0.34 litres.
2. Close plug C and open filler
cap A (Figure 32).
3. Feed the new oil to the
multiplier gear and close
filler cap A. The required
amount is 0.34 litres.
4. You can check the oil level
through oil level gauge B
(Figure 32).
Hakki Pilke 55 Pro
30 / 48
Figure 32.
Translation Version 3-2022