Tightening Angular Gear Drive Belts In Model Tr60; Belt Tightness; Tightening Angular Gear Drive Belts In Model Trs60 - Hakki Pilke OH 27 Instructions For Assembly, Operation And Maintenance

Tightening Angular Gear Drive Belts in Model TR60

Tightening Angular Gear Drive Belts in Model TRS60

Hakki Pilke 27
31 (39)
1. Open the locking of the belt
adjustment.
2. Open the locking of the adjustment nut.
3. Achieve the correct belt tightness by
turning the adjustment nut.

Belt tightness:

The belts should give way
approx. 15 to 20 mm when pushed
down between the pulleys.
4. Tighten the locking of the
adjustment.
Locking
Belt tightening (electric motor)
Belt tightening
Angular gear belt locking
Original Version 5-2014