General Information; Introduction; Purpose Of Use; Machine Models And Basic Information - Hakki Pilke 55 PRO Manual

1. General information

1.1. Introduction

The purpose of this manual is to ensure that the machine is used in the manner intended by the
manufacturer, taking safety into consideration. Everyone operating the machine or working in close
proximity to it must study this manual carefully.
Operators of the machine are expected to have basic skills in tractor handling, such as utilising the cardan
shaft drive and the tractor's lifting equipment. Before commencing work, operators must also familiarise
themselves with the machine's control and safety equipment and ensure their proper operation.
More information on Hakki Pilke products can be found on our website at www.hakkipilke.fi.
Keep this manual in the immediate vicinity of the machine.

1.2. Purpose of use

The Hakki Pilke 55 Pro firewood processor is designed for preparing firewood from pruned wood or logs.
The firewood processor must not be used to process any treated wood, such as is found in construction
waste. Sand, nails or other impurities in the wood may damage the machine.
The maximum diameter of the logs to be processed is 55 cm. This limit must not be exceeded. Machine is
designed to perform the best when used +20 cm diameter trees. When estimating the diameter of the log
you are about to cut, note that the shape of the log and other factors, such as branches and burrs, make
the actual diameter larger, and may prevent the log from being fed into the machine. The splitting groove
is designed for logs up to 60 cm in length. Never cut or split logs that exceed the maximum length.

1.3. Machine models and basic information

Model
Driving power
Weight
PTO/Electrical drive
Height/width/length
In-feed/out-feed
conveyor
Saw bar/chain
Max log diameter
Max/min log length
The machine's serial number, date of manufacture, weight, operating voltage (electric-powered machine)
and model are indicated on the grey type plate located on the machine frame on the right side from the
operator's position.

1.4. Operating conditions

• The temperature range within which the machine can be operated is -20 to +30 °C. In the winter,
the operator must ensure that there is no risk of slipping in the working area.
• The working area must be level and clear of unnecessary items. No unauthorised persons may enter
the working area. The machine may only be used in sufficient lighting conditions.
• The machine may not be used indoors.
Hakki Pilke 55 Pro
4 / 48
TR
Tractor's cardan shaft (PTO)
3,240 kg
min 50 hp / max 500 rpm
in working position 2,900/5,970/2,740 (mm)
bar: 25" groove 2.0 mm. chain: 88 loops, pitch 0.404"
55 cm (Recommended minimum diameter 20 cm)
Translation
PTO
21.3 kW (min 50 A, type C fuse)
2,740/1,800 (mm)
Log max 60 cm; min 25 cm
Combi
Electrical
3,380 kg
Version 3-2022