Guarantee Terms - Hakki Pilke 55 PRO Manual

The saw bar is not lowered
fully when the cutting button
is pressed.

6. Guarantee terms

"Guarantee terms come into force when you register your customership in the extranet service."
The guarantee is valid for the original buyer for 12 months, starting from the date of purchase, but for no
more than 1,000 operating hours.
Always contact the machine's seller before undertaking any procedures in matters concerning the
guarantee.
A guarantee claim must be issued to the seller in writing immediately upon the discovery of a defect. If the
defect concerns a damaged part or component, please send a photograph of the damaged part or
component to the seller, if possible, so the fault can be identified. When submitting a guarantee claim, the
buyer must always include the type and serial number of the machine in the claim and present a receipt
that includes the date of purchase. Guarantee claims must be submitted to an authorised retailer.
The guarantee covers
• Parts damaged in normal use due to faults in the material or manufacturing.
• Reasonable repair expenses in accordance with the agreement between the seller or buyer and
the manufacturer. Faulty parts will be replaced with new ones. A faulty part or parts replaced due
to a material fault must be returned to the manufacturer via the retailer.
The guarantee does not cover
• Damage caused by normal wear and tear (such as saw blades and belts), improper use or failure to
observe the instruction manual.
• Damage caused by negligence of maintenance or storage procedures detailed in the instruction
manual.
• Damage occurred in transport.
• Cutting blades, V-belts and oil, as well as normal adjustment, care, maintenance or cleaning
procedures.
Hakki Pilke 55 Pro
45 / 48
4. Burnt fuse in 12 V control
box
1. Saw dust or debris under the
saw drive end
Translation
1. Clean
Version 3-2022