Using The Sawdust Blower (Accessory) - Hakki Pilke 55 PRO Manual

3.2.7.
An electric or hydraulic sawdust removal device is available for the machine as an accessory. The sawdust
blower allows you to keep the base of the machine clean and collect sawdust for other purposes.
Note! The machine is not intended to be used without the sawdust blower!
The electric external sawdust blower
operates with standard 1-phase
mains current. 230 V 50 Hz.
The sawdust blower is provided with
its own operating manual. Please
read the manual before using the
device.
Connect the sawdust blower to the
machine, as follows:
1. Attach the sawdust blower's
hose to connector F in Figure
22.
2. Then, observe
instructions in the sawdust
blower's operating manual.
The hydraulic sawdust
operates using the machine's own
hydraulics. Connect the sawdust
blower hoses as follows:
1. Disconnect the other end of
the short hose from quick
coupling A.
2. Connect the
blower's pressure hose to the
female connector of the
detached hose end.
3. Connect the
collector's return hose to the
free quick coupling, i.e. B
4. Connect the
collector's overflow hose to
quick coupling C.
Hakki Pilke 55 Pro

Using the sawdust blower (accessory)

the
blower
sawdust
sawdust
sawdust
Translation
20 / 48
Figure 22.
Figure 23.
Version 3-2022