Washing And Cleaning; Storage - Hakki Pilke 55 PRO Manual

Figure 59:
A is relief valve 2.
B is tank valve 3.

5.8. Washing and cleaning

Any loose dirt and sawdust can be removed from the machine with pressurised air, for example. The
machine can also be washed with a high-pressure washer, as long as the water jet is not aimed directly at
the bearings or electrical equipment.
Always ensure that the machine and the working area are sufficiently clean during operation. The machine
must always be cleaned after use. Clean the machine at suitable intervals and always before storing the
machine for a prolonged time. After washing, the firewood processor must be lubricated according to the
instructions in Section 6.

5.9. Storage

Although the machine is intended for outdoor use, it should be covered and stored in a sheltered location
or indoors. Before prolonged storage, the machine must first be cleaned, then washed according to the
instructions in Section 9 and lubricated according to Section 6.
Hakki Pilke 55 Pro
42 / 48
Figure 59.
Translation Version 3-2022