Saw Chain Lubrication - Hakki Pilke 55 PRO Manual

5.6. Saw chain lubrication

The saw chain is
lubricated whenever it rotates. The
chain oil is fed to the chain from the
tank with the help of an electric pump,
i.e. the pump always pushes oil to the
chain when the chain rotates. You can
adjust the amount of saw chain oil fed
to the chain with the help of adjuster A
(Figure 53), i.e. the amount of oil
decreases when the adjuster is
tightened and vice versa.
Note! The adjustment screw lock must
first be removed by lifting the cap,
which releases the screw for free
rotation.
The factory setting for adjuster A
(Figure 53) is 2 turns towards the open
position from the closed position.
Increase or decrease the amount as
necessary according to the size and
type of wood, air temperature and
type of oil.
Always check before you
working that the chain receives oil
when the machine is turned off and
the cage is closed (with the 12 volt
electricity connected).
You can monitor the oil level of the saw
chain through sight glass C (Figure 54).
When the oil level is below the sight
glass C level (the glass is clear instead
of the colour of oil), the saw chain oil
must be immediately added through
filler cap B (fill approx. 5 litres). Tank
capacity is about 6 litres.
Hakki Pilke 55 Pro
automatically
start
39 / 48
Figure 53.
Figure 54.
Translation Version 3-2022