Table of Contents
Advertisement
2
Hardware Requirements
1.
OSS-PCIe-HIB616-x16 card configured as a Host.
2.
OSS-PCIe-HIB616-x16 card configured as a Target.
3.
SFF-8644 Gen 4 PCIe x4 cable
a.
x16 Configuration: Four PCIe Gen4 cables
b.
x8 Configuration: Two PCIe Gen4 cables
c.
x4 Configuration: One PCIe Gen4 cable
4.
Gen4 x16 PCIe slot (computer motherboard)
5.
OSS Expansion Chassis / OSS Gen4 Backplane
2.1
OSS-PCIe-HIB616-x16 card
A pair of HIB616-x16 card, one is configured as a host card and the other is configured as a target card.
2.2
SFF-8644 Gen4x4 Cable
This passive copper cable mates to the SFF-8644 connectors on the HIB6xx family of OSS host interface board.
•
Tested and validated with 1m, 2m and 3m lengths.
•
Single or multiple cables can form larger PCIe links.
o
x4 (1 cable)
o
x8 (2 cables)
o
x16 (4 cables)
Qualified the following PCIe Gen 4 x4 (with GREEN and BLACK tab) cables, see photos below. The FPGA in the HIB616-x16 card does not support
CMI operations.
One Stop Systems
HIB616x16 (Rev B) |15
Advertisement
Table of Contents
