1
Introduction
PCIe x16 Gen 4 HIB (Host Interface Board) with PCIe quad SFF-8644 cable connectors as used in the PCISIG PCI Express External Cable
Specification can be configured as x16, two x8, one x8 and two x4 or four cable ports. The cable adapter operates in host and target mode with
a DIP switch setting change.
Part# OSS-PCIe-HIB616X16
1.1
Specifications
Item
Form Factor
Dimensions
Bandwidth
Connectors
Bracket
PCIe Switch
Switch Latency
Cable Types
Cable Connection Modes
Power
Operating Temperature
Storage Temperature
Operating Humidity
Storage Humidity
Agency Compliance
Operating System
Description
PCIe 4.0 x16 half-height, half-length
6.6 x 2.65" (16.76 x 6.73 cm) at 0.063" (1.6mm) thickness
256Gb/s
• PCIe x16 card edge connector
• Quad SFF-8644 connectors on the bracket
• Compliant to PCI-SIG PCI Express External Cable Specification 3.0
Standard and low-profile brackets available
Broadcom PEX88032
•
16 GT/s /32-Lane PCI Express Gen 4 Switch
•
DMA Controller
•
SSC Isolation
150ns
Supports the following cable types:
•
SFF-8644 PCIe CMI copper cables
•
Mini-SAS-HD copper cables
One x16 host connection via edge card to:
•
One x16 cable connection
•
Up to two x8 cable connections
•
Up to four x4 cable connections
60W max
•
1.5A @3.3V
•
3A @12V
•
250mA @ 3.3V aux
0˚C to +50˚C
-40˚C to 85˚C
10% to 90% relative humidity non-condensing
5% to 95% relative humidity non-condensing
Designed to meet the following agency standards:
•
FCC - Part 15 Class A, 47CFR; Canada ICES-003, issue 4, Class A; Japan: VCCI, Class A; CE
Emissions 2004-108EC
•
UL/IEC 60950-1; Canada: CSA C22.2 No. 60950-1; Argentina: IEC60950-z; IEC 60950-1 (CB
Certificate and CB Test Report)
•
CE Mark (EN55022 Class A, EN60950-1, EN55024, EN61000-3-2, EN61000-3-3)
•
CISPR 22, CISPR 24, Class A: Australia/New Zealand AS/NZS CISPR 22, Class A
•
RoHS 6 of 6 compliance (Directive 2011/95/EC)
Supports the following OS.
Windows 7, 10, Windows Server 2012 R2
Linux Based OS
One Stop Systems
HIB616x16 (Rev B) |7