Install The Host Card - OSS -PCIe-HIB616-x16 Manual

Plugin the Target card in the x16 PCIe upstream slot / target slot on the expansion board.
Note: Do not plug a Target-configured card in a downstream slot. The Target card will not function in a downstream slot and
may cause damage.
Secure the card by screwing the card-bracket to the chassis.
3.4

Install the Host card

Install a Host-configured card in a x16 Gen4 PCIe slot of a motherboard.
•
Check the PCIe slot for any foreign debris as this can damage the card during installation.
•
Align the host card PCIe connector on top of the PCIe slot and carefully push the card down until it is firmly seated.
Do not plug in the Host card while the board or the unit is ON or has power. Disconnect the power first prior to installing the
card.
Secure the card!
One Stop Systems
HIB616x16 (Rev B) |20