4.3
Standard & Bifurcated Configurations
4.3.1
Standard Configurations
•
x16:
Using four Gen4 SFF-8644 cables. When using a x16 standard configuration, the host card dipswitches must be set to x16 host
mode. Make sure the Target card is set to Target mode.
•
x8:
Using two Gen4 SFF-8644 cables.
Leave the dipswitches on the Host card to x16 mode, it will automatically down-train to x8 link. Make sure the Target card is set to Target
mode.
One Stop Systems
HIB616x16 (Rev B) |29