3.5.2
x8 configuration: TWO cables
Note: Make sure the HIB616-x16 host card is set to x8 configuration, see x8 switch setting section.
•
st
Plug-in the 1
cable to Port#0 (Top port) on both Target and Host cards
•
Plug-in the 2
nd
cable to Port#1 on both Target and Host cards.
On the host card, you can move the two PCIe cables to the bottom ports. 1
st
Cable to PORT #2 and the 2
nd
One Stop Systems
cable to PORT #3.
HIB616x16 (Rev B) |22