Figure 3-8: Attach With Expansion Bolts; Figure 3-9: Completed Installation - Baicells Nova846 Installation Manual

Nova846 Outdoor 8x5W Two-Carrier TDD eNodeB Installation Guide
4. Install the wall bracket to the expansion bolts using flat washers, spring washers, and hex
nuts (Figure 3-8).

Figure 3-8: Attach With Expansion Bolts

5. Attach the eNB to the mounting bracket on the wall. Push the eNB until the hook is firmly
attached to the mounting bracket. Tighten the screw on the bottom of the bracket using a
Phillips-head screwdriver to complete the installation (Figure 3-9).

Figure 3-9: Completed Installation

19