Baicells Nova846 Installation Manual page 32

Nova846 Outdoor 8x5W Two-Carrier TDD eNodeB Installation Guide
Field Name
LGW Interface Binding
LGW IP Pool
LGW IP Pool Netmask
Static Address
First Address
Last Address
IMSI to IP Binding - IMSI
IMSI to IP Binding - IP
3.8.4.3 Static Routing
When using static routing, go to Network > Static Routing. The Network > Static Routing landing
page has two main sections, Validated Route List and Static Routing Setting (Figure 3-18). The
configured static route information is displayed under Static Routing Setting. To add or edit a static
route in the list, click on the settings icon, enter the information, and click Save. Field descriptions
are in Table 3-3.
Description
The IP address connects to the LGW. Select from configured interfaces.
Default is WAN interface. The VLAN interface can also be used to separate
different links.
Enter the starting IP address of the dynamic IP address pool
For example, if the first IP address is 10.10.10.1 and the netmask is
255.255.255.0, the IP address pool includes 255 IP addresses. The options are
shown in the pull-down menu:
If LGW Mode = Router (Figure 3-18, section
use a static IP address.
If LGW Mode = Router and Static Address = ON
enter the first static IP address in the range.
If LGW Mode = Router and Static Address = ON
enter the last static IP address in the range.
If LGW Mode = Router and Static Address = ON
if you want to bind an IMSI number to the IP address, enter the IMSI number.
If LGW Mode = Router and Static Address = ON
enter the IP address to bind to the IMSI. You can add more than one IP
address.
32
3.8.4.3), set to ON if you want to
(Figure 3-18, section 3.8.4.3),
(Figure 3-18, section 3.8.4.3),
(Figure 3-18, section 3.8.4.3),
(Figure 3-18, section 3.8.4.3),