SmartLi 1.0
User Manual
Step 5 Insert four M12x115 expansion bolts into the expansion bolt holes in the floor,
and tighten the expansion bolts.
Figure 5-14 Tightening expansion bolts
----End
5.2.2.2 Non-Secured Installation
Procedure
Step 1 Adjust the four anchor bolts at the bottom of the cabinet until all the four castors
at the bottom hang in the air and the anchor bolts bear all of the cabinet weight.
Figure 5-15 Castors hanging in the air
Step 2 Check the cabinet levelness using a level instrument. If the cabinet is not level,
wrench the anchor bolts.
----End
5.2.3 Installing Cables
Issue 09 (2023-03-26)
Copyright © Huawei Digital Power Technologies Co., Ltd.
5 Installation and Cable Connection
55