Table of Contents
Advertisement
SmartLi 1.0
User Manual
Ensure that all necessary tools are ready and inspected by a professional
organization. Do not use tools that have signs of scratches or fail to pass the
inspection or whose inspection validity period has expired. Ensure that the tools
are secure and not overloaded.
Before installing equipment in a cabinet, ensure that the cabinet is securely
fastened with a balanced center of gravity. Otherwise, tipping or falling cabinets
may cause bodily injury and equipment damage.
When pulling equipment out of a cabinet, be aware of unstable or heavy objects
in the cabinet to prevent injury.
Do not drill holes into the equipment. Doing so may affect the sealing
performance and electromagnetic containment of the equipment and damage
components or cables inside. Metal shavings from drilling may short-circuit boards
inside the equipment.
General Requirements
●
●
●
●
●
Working at Heights
●
●
●
Issue 09 (2023-03-26)
WARNING
WARNING
WARNING
WARNING
Repaint any paint scratches caused during equipment transportation or
installation in a timely manner. Equipment with scratches cannot be exposed
for an extended period of time.
Do not perform operations such as arc welding and cutting on the equipment
without evaluation by the Company.
Do not install other devices on the top of the equipment without evaluation
by the Company.
When performing operations over the top of the equipment, take measures to
protect the equipment against damage.
Use correct tools and operate them in the correct way.
Any operations performed 2 meters or higher above the ground should be
supervised properly.
Only trained and qualified personnel are allowed to work at heights.
Do not work at heights when steel pipes are wet or other risky situations
exist. After the preceding conditions no longer exist, the safety owner and
Copyright © Huawei Digital Power Technologies Co., Ltd.
1 Safety Information
18
Advertisement
Table of Contents
