Table of Contents
Advertisement
SmartLi 1.0
User Manual
Procedure
Step 1 Use a pallet truck to transport the cabinet to the installation position.
Step 2 Remove the packing case and dust cover. Keep the dust cover, accessories, and
marking-off template aside.
Step 3 Check that the cabinet is intact.
1.
2.
Step 4 After confirming that the cabinet is intact, remove the L-shaped bracket that
secures the cabinet and pallet, and secure the sliding plate to the pallet using the
M12 screws that you have removed.
Figure 5-2 Removing L-shaped brackets
Issue 09 (2023-03-26)
Visually inspect the cabinet appearance for damage caused during
transportation. If any damage is founded, report the photos to the carrier
immediately.
Check that all fittings comply with the packing list. If there is any discrepancy,
keep a record and contact the supplier immediately.
Copyright © Huawei Digital Power Technologies Co., Ltd.
5 Installation and Cable Connection
46
Advertisement
Table of Contents
