Table of Contents
Advertisement
SmartLi 1.0
User Manual
Before installing and commissioning batteries, prepare fire extinguishing facilities,
such as fire fighting sands and carbon dioxide fire extinguishers, according to
construction standards and regulations. Before putting the battery room into
operation, ensure that it is equipped with a fire extinguishing system that
complies with local laws and regulations, has been constructed and commissioned,
and can work in automatic and manual control modes.
Before unpacking, storage, and transportation, ensure that the packing cases are
intact and correctly placed according to the labels on the packing cases. Do not
place a battery upside down or vertically, lay it on one side, or tilt it. Stack the
batteries according to the stacking requirements on the packing cases. Ensure that
the batteries do not fall or get damaged. Otherwise, they will need to be scrapped.
After unpacking batteries, place them in the required direction. Do not place a
battery upside down or vertically, lay it on one side, tilt it, or stack it. Ensure that
the batteries do not fall or get damaged. Otherwise, they will need to be scrapped.
Tighten the screws on copper bars or cables to the torque specified in this
document. Periodically confirm whether the screws are tightened, check for rust,
corrosion, or other foreign objects, and clean them up if any. Loose screw
connections will result in excessive voltage drops and batteries may catch fire
when the current is high.
After batteries are discharged, charge them in time to avoid damage due to
overdischarge.
Statement
The Company shall not be liable for any damage or other consequences to
the batteries it provides due to the following reasons:
●
Issue 09 (2023-03-26)
WARNING
WARNING
WARNING
WARNING
WARNING
Batteries are damaged due to force majeure such as earthquakes, floods,
volcanic eruptions, debris flows, lightning strikes, fires, wars, armed conflicts,
typhoons, hurricanes, tornadoes, and extreme weather conditions.
Copyright © Huawei Digital Power Technologies Co., Ltd.
1 Safety Information
6
Advertisement
Table of Contents
