Table of Contents
Advertisement
SmartLi 1.0
User Manual
Site Selection Requirements
Refer to GB 50174, NFPA 855, and local laws and regulations.
Do not select the sites that are not recommended by industry standards and
regulations, including but not limited to the following areas:
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
1.5 Mechanical Safety
When working at heights, wear a safety helmet and safety harness or waist belt
and fasten it to a solid structure. Do not mount it on an insecure moveable object
or a metal object with sharp edges. Make sure that the hooks will not slide off.
Issue 09 (2023-03-26)
NO TICE
Areas with sources of strong vibration, loud noises, and strong
electromagnetic interference
Areas with dust, oil fumes, harmful gases, corrosive gases, etc.
Areas with corrosive, flammable, and explosive materials
Areas with existing underground facilities
Areas with adverse geological conditions such as rubbery soil and soft soil
layer, or prone to waterlogging and land subsidence
Under a reservoir, water landscape, and water room
Areas prone to earthquakes and with seismic fortification intensity higher
than 9
Areas prone to debris flow, landslide, quicksand, karst caves, flood, and other
direct hazards
Areas within the mining land subsidence (dislocation) zone
Areas within the scope of blasting hazard
Areas prone to flood due to a dam or levee failure
Protection areas for important water supply sources
Protection areas for historic relics
Densely populated areas such as residential communities and commercial
districts
High-rise buildings and underground buildings
Intersections and busy roads of urban main roads
D ANGER
Copyright © Huawei Digital Power Technologies Co., Ltd.
1 Safety Information
17
Advertisement
Table of Contents
