Table of Contents
Advertisement
SmartLi 1.0
User Manual
● Use the sealing putty delivered with the equipment to seal the cabinet.
● Do not remove the transparent film.
● Do not cut the sealing putty.
Figure 5-35 Filling a gap with sealing putty
(1) Paper protective film
Issue 09 (2023-03-26)
NO TE
1. In the scenarios where covers are removed for routing cables, after routing cables and
checking cable connections, use sealing putty to fill in the gap between the cables and
the cabinet.
2. After verifying the installation, reinstall all the covers.
3. Do not remove the dust covers before power-on to prevent dust from entering the
cabinet.
CA UTION
Copyright © Huawei Digital Power Technologies Co., Ltd.
5 Installation and Cable Connection
(2) Sealing putty
72
Advertisement
Table of Contents
