Huawei SmartLi 1.0 User Manual page 48

SmartLi 1.0
User Manual
Table 4-4 Voltage requirement and method for measuring voltage after recharge
Battery Type
BM-6440A1
Step 7 Remove the battery module cables, place the battery module in the original
packing case, and update the latest charge time and next charge time on the
recharge label of the original packing case. The battery module should be used as
soon as possible.
----End
Issue 09 (2023-03-26)
Required Voltage After
Staying in Open-Circuit State
for 10 Minutes Following
Recharge
≥ 65 V
Copyright © Huawei Digital Power Technologies Co., Ltd.
4 Transportation and Storage Requirements
Method for Measuring
Battery Voltage
● Method 1: Use a voltmeter
to measure the voltage
between the positive and
negative terminals of the
battery.
● Method 2: Check the
battery terminal voltage in
the test information
displayed on the portable
battery charger/discharger.
41