Table of Contents
Advertisement
SmartLi 1.0
User Manual
Figure 4-1 Cable connection diagram
(1) Portable battery charger/
discharger
(4) Power cable (negative)
Step 4 On the portable battery charger/discharger, select the activation mode, set the
battery type to BM-6440A1, and start charging.
Step 5 Observe the cell voltage and temperature in real time on the portable battery
charger/discharger to prevent overvoltage, overtemperature, undervoltage, and
undertemperature, ensuring the charging safety of the battery module.
Step 6 After the charging ends, disconnect the power supply from the portable battery
charger/discharger, and check whether the recharge meets requirements according
to
Issue 09 (2023-03-26)
NO TE
During recharge, the portable battery charger/discharger detects the cell voltage of the
battery module in real time and terminates charging based on the parameters
corresponding to the charging mode. This protects the cell from overcharge and
overdischarge.
Table
4-4.
Copyright © Huawei Digital Power Technologies Co., Ltd.
4 Transportation and Storage Requirements
(2) Battery module
(5) Power cable (positive)
(3) Communications cable
40
Advertisement
Table of Contents
