Related Manuals for Huawei EchoLife EG8141H5
Summary of Contents for Huawei EchoLife EG8141H5
- Page 1 EchoLife EG8141H5 Quick Start for QR code Issue Date 2022-11-02 HUAWEI TECHNOLOGIES CO., LTD.
- Page 2 Notice The purchased products, services and features are stipulated by the contract made between Huawei and the customer. All or part of the products, services and features described in this document may not be within the purchase scope or the usage scope. Unless otherwise specified in the contract, all statements, information, and recommendations in this document are provided "AS IS"...
-
Page 3: Table Of Contents
EchoLife EG8141H5 Quick Start for QR code Contents Contents 1 Placing the Device........................1 2 Connecting Cables........................4 3 Indicator Description......................6 4 Technical Specifications......................8 5 FAQs............................9 Issue 03 (2022-11-02) Copyright © Huawei Technologies Co., Ltd. -
Page 4: Placing The Device
● It is recommended that the computer and ONT be put far away from electric appliances that generate strong magnetic or electric fields, such as microwave ovens. Mounting an ONT on the desk The figure below shows an ONT that is horizontally placed on a desk. Issue 03 (2022-11-02) Copyright © Huawei Technologies Co., Ltd. - Page 5 Use a screwdriver to fasten the screws into the expansion bolts, reserving 5 mm ends out of the wall, and mount the ONT onto the screws. Issue 03 (2022-11-02) Copyright © Huawei Technologies Co., Ltd.
- Page 6 EchoLife EG8141H5 Quick Start for QR code 1 Placing the Device NO TE It is recommended that the screw be about 4 mm in diameter and longer than 20 mm. Issue 03 (2022-11-02) Copyright © Huawei Technologies Co., Ltd.
-
Page 7: Connecting Cables
● The fiber connector connected to the optical port on the wall varies depending on actual conditions. ● To ensure normal use of fibers, make sure that the fiber bending radius is larger than 30 Issue 03 (2022-11-02) Copyright © Huawei Technologies Co., Ltd. - Page 8 (longer than 10s) to restore the device to the default settings and reset the device. NOTE Reset Huawei ONTs with caution. Otherwise, the ONTs may fail to access the Internet. If an ONT cannot access the Internet after a reset, contact your Internet service provider.
-
Page 9: Indicator Description
Data is being transmitted over the WLAN port. The WLAN function is disabled. Steady on The WPS function is enabled. Blinking A Wi-Fi terminal is accessing the system. The WPS function is disabled. Issue 03 (2022-11-02) Copyright © Huawei Technologies Co., Ltd. - Page 10 The ONT is not connected to fibers or does once every not receive optical signals. 2 seconds Blinks once Blinks The hardware is faulty. evey 2 once every seconds 2 seconds Issue 03 (2022-11-02) Copyright © Huawei Technologies Co., Ltd.
-
Page 11: Technical Specifications
● Dimensions (H x W x D): 30 mm x 168 mm x 115 mm (without external antenna and pads) ● Weight: About 230g ● Maximum system power consumption: 7 W Issue 03 (2022-11-02) Copyright © Huawei Technologies Co., Ltd. -
Page 12: Faqs
● Wireless login Connect your mobile phone, pad, or PC to the Wi-Fi network of the Huawei ONT. Enter the IP address in the address box of a browser and press Enter. On the displayed login page, enter the username and password. - Page 13 ● Change the initial password after logging in to the web page for the first time. How do I change the Wi-Fi password? Log in to the Huawei ONT web page using your mobile phone, pad, or PC. For details, see "How do I log in to the Huawei ONT web page?"...
- Page 14 2. Wi-Fi speed is affected by the Wi-Fi signal strength and quality. Ensure that the Huawei ONT is far away from interference sources such as TVs, microwave ovens, refrigerators, cordless phones, and Bluetooth devices, and reduce the number of obstacles between the Huawei ONT and Wi-Fi devices (such as pads, mobile phones, and laptops).
- Page 15 How do I restore the Huawei ONT to factory setting? Press Reset by using a needle-type object for longer than 10s to restore factory defaults and reset the Huawei ONT. If the indicator is off and then is lit, the system restarts successfully.
Need help?
Do you have a question about the EchoLife EG8141H5 and is the answer not in the manual?
Questions and answers
My question is lose problems
The Huawei EchoLife EG8141H5 may experience the following common loss problems:
1. No Fiber Connection: The ONT is not connected to fibers or does not receive optical signals. This is indicated by the optical signal LED blinking once every 2 seconds.
2. Hardware Fault: A hardware issue may be present if the related LED blinks once every 2 seconds.
3. Connection Issues: If the ONT fails to establish or maintain a connection with its upper-layer device, users may experience network loss.
These issues can lead to connectivity problems and service interruptions.
This answer is automatically generated
how to change password if I forget password?
To reset the Wi-Fi password on a Huawei EchoLife EG8141H5 if forgotten:
1. Log in to the Huawei ONT web page using your PC with a wired connection. For login details, refer to "How do I log in to the Huawei ONT web page?"
2. Navigate to the Advanced > WLAN tab and select WLAN Basic Configuration.
This allows you to view or change the Wi-Fi password.
This answer is automatically generated