Regency Fireplace Products Onyx EX110 Instructions For Use & Installation page 32

OPTIONAL LED MOOD LIGHTING (PART CODE 923-385)
The appliance can be enhanced by an optional LED Mood Lighting Strip. This comes with 10' (3 m) of LED mood lighting and can be operated using the
remote control provided with this appliance. A second LED mood kit strip may be obtained if more than 10' (3m) is required. This can be connected to the
end of the first LED lighting strip or by using the splitter that is provided with the kit. A maximum of 3 kits is permitted.
Contents
Installation
Locate pigtail on right hand side of appliance.
1
Connect other end of LED mood lighting kit to the
pigtail as shown below.
Cut LED strip to desired length. Ensure cut line is
2
as per below.
Peel adhesive from back side of LED strip.
3
4
920-667
32
'
10 /3m
LED Mood
Lighting
x1
Maximum Length: ≤20'/6m
Option
Option
pigtail from
appliance
Option
4 Not permitted.
Example
1 x LED Mood
Lighting Strip
LED Mood Lighting Strip Kit
Installation Instructions
Part Code: 923-385
'
6.7 / 2m
Wiring from appliance to
LED Mood Lighting
x1
Maximum 20' (6m) with no splitter required.
1
If more than 10' (3m) is required a second 923-835 LED Mood Lighting
Strips would need to be purchased.
2 Maximum 20' (6m) using supplied splitter
2 x 923-835 LED Mood Lighting Strips required.
Maximum 20'(6m) with splitter from the original kit & additional splitter
3
from second LED mood lighting strip kit purchased.
3 x 923-835 LED Mood Lighting Strips required.
2 x 923-835 Mood Lighting strip kit & 1 x splitter and 1 x wiring
from appliance to LED mood lighting used. See below.
TV
Splitter
x1
'/
10 3m
'/ '/
= 10 3m (<20 6m)
10'/3m
10'/3m
= 20'/6m
10'/3m
'/
6.7 2m
'/
3.3 1m
= 20'/6m
10'/3m
10'/3m
10'/3m
>20'/6m
1 x LED Mood
Lighting Strip
Splitter
Pigtail from
appliance
✔ ✔
✔ ✔
✔ ✔
X X
Wiring from
appliance to
LED Mood
Lighting
03.30.23