Regency Fireplace Products Onyx EX110 Instructions For Use & Installation page 22

RIGHT VIEWING FACE (RIGHT CORNER CONVERSION) RIGHT VIEWING FACE (RIGHT CORNER CONVERSION)
1
Remove 7 Phillips heads screws and recycle metal side cover.
2
Do not discard screws.
Secure the top/bottom trim using the sames screws removed
3
in step 2. Do not tighten. Secure back trim using same screws
removed in step 2.
Ensure that the trims are all flush to each other prior to
4
tightening all 7 screws.
22
PRE-INSTALLATION
Remove the decorative trim support bracket and recycle
5
(depending on model there may be 2 trim support brackets)
Reinstall screws.